You may have observed that WMI Provider Host Service is consuming High CPU Usage significant amount of your computer’s processing power. Your PC slows significantly when the CPU use in Task Manager increases and crush the limits. This High CPU Usage is being reported by many Windows 10 users, so you’re not alone. As annoying as it may appear, you can resolve the high CPU usage issue on your own.
WMI Provider Host Service (WmiPrvSE.exe) and what does it do?
Windows Management Instrumentation Provider Service (WmiPrvSE.exe) stands for Windows Management Instrumentation Provider Host. It’s a crucial service that prevents programs from running. Many of your PC’s features will become useless if this process stops. Furthermore, you may not receive any error notifications at all.
Best way to get rid of WMI Provider Host Service High CPU Usage?
It is not technically viable to remove the WMI Provider Host Service because most programs rely on it to work properly. Stopping this will create significant instability in system components and may result in your Operating System crashing. It is strongly recommended that you never try to stop or remove the Windows Management Instrumentation (WMI) Provider Host (WmiPrvSE.exe).
WMI Provider Host Service consuming so much processing power?
- WMI Provider Host Service isn’t supposed to be left running all the time. Its sole purpose is to remain inactive and reply to requests for information via WMI from other applications or scripts. As long as it is idle, it should not waste your CPU power. It may require some CPU resources to respond to a request on occasion, but this should only be for a short time.
- The WMI Provider Host Service should not consume a lot of CPU resources all of the time, therefore prolonged high CPU utilization is a symptom that something is seriously wrong.
- The cause might be anything: the process itself could be trapped in an undesirable state, another service could be causing the WmiPrvSE.exe service to keep running, or a malicious software could be keeping the WMI Provider Host Service in the loop.
- Whatever the cause, we’ve discovered a few simple solutions to assist you resolve the WMI Provider Host Service excessive CPU consumption issue on your Windows PC.
FIX WMI Provider Host Service High CPU Usage
Here are four options for resolving this problem. It’s possible that you won’t need to try all of them. Simply work your way down the list until you reach the end.
- Run Virus Scan
- Boot into Safe Mode with Networking
- Restart WMI Provider Host Service
- Uninstall Components and Drivers Causing the Problem
Fix.1 Run a virus scan as a first step.
Viruses or malware are sometimes at blame. To correct it, all you have to do is run your antivirus program. You should do it right now if you haven’t already.
If your PC detects any undesirable apps or applications, uninstall them completely and restart your computer.
Fix 2: Start your computer in Safe Mode with Networking.
Troubleshooting in Safe Mode will aid you in isolating and identifying the source of the problem:
- Click the Windows logo key and R simultaneously on your keyboard, then type msconfig in the search box and press Enter.
- Select Network option from the Boot menu, then tick the box for Safe boot. To save, click Apply and OK.
- Make sure you’ve saved all of your files and data before clicking Restart to boot into Safe Mode.
- Select Windows PowerShell while in Safe Mode by pressing the Windows logo key and X at the same time (Admin).
- After that, type the command below and click Enter. msdt.exe -id MaintenanceDiagnostic You will be presented with a troubleshooting window. To continue with the troubleshooting, click Next. If the troubleshooter identifies a problem with your system, follow the on-screen instructions to have it fixed.
- Type the following command into the PowerShell window and hit Enter. msdt.exe /id PerformanceDiagnostic A Performance troubleshooting window will appear; simply click Next to continue investigating. Still, if you receive a message that something in your system needs to be modified, follow the system’s instructions.
- Once the troubleshooting procedure is complete, you must return to your normal mood. Step 1 should be repeated. Then go to the Boot tab and clear the Safe boot box. To save and exit, click Apply and OK. Return your computer to normal mode by restarting it.
Fix.3 Restart the WMI Provider Host Service as a last resort.
WMI Provider Host Service may be consuming too much of your PC’s resources in some instances. You can re-start it by typing:
1) Click the Windows logo key and R at the same moment on your keyboard, then type services.msc into the search box and press Enter.
2) To quickly locate the Windows Management Instrument service, press the W key. Restart it by right-clicking it.
3) Select Command Prompt by pressing the Windows key and X at the same time (Admin).
Note: If you’re using the Windows 10 Creators Update, put cmd.exe into the search box and select Command Prompt from the menu and right-click the Command Prompt option and select Run as administrator.
4) In Command Prompt window, type following commands and press Enter after each command.
net stop iphlpsvc
net stop wscsvc
net stop Winmgmt
net start Winmgmt
net start wscsvc
net start iphlpsvc
5) Restart your PC after these commands.
Fix 4: Remove the problematic components and drivers to Fix WMI Provider Host Service.
Faulty components and hardware drivers are one of the causes. You might want to remove them from your computer:
1) Press the Windows logo key and X at the same moment on your keyboard, then pick Event Viewer.
2) Select Show Analytic and Debug Logs from the View menu at the top.
3) Go to Applications and Service Logs > Microsoft > Windows > WMI Activity > Operational log in the left pane. Mark the most recent things on the list as Error.
4) Press the Windows logo key and X at the same moment on your keyboard, then pick Task Manager.
5) Select the Details tab. Find the processes with matching IDs in the PID column of Event Viewer. When you find a process like this, you can uninstall it or disable its service as needed.
It is important that you only download and install programs and drivers from reputable sources.
You can update and install your drivers in two ways:
Manual driver update – You can manually update your drivers by heading to your device’s manufacturer’s website and looking for the most recent accurate driver. Make sure you only install drivers that are compatible with your version of Windows.
Automatic driver update — If you don’t have the time, patience, or computer skills to manually update your drivers, Driver Easy, which is available for free, can do it for you.